QSC GXD8 4500 WATT PROCESSING AMPLIFIER

There’s a QSC GXD amplifier within 1dB of the ideal power for your speaker system. Best practice is to use an amplifier capable of delivering approximately twice the loudspeaker’s rated power capacity. Too little amplifier and the speakers won’t deliver everything they’re capable of and the risk of destructive amplifier clipping is increased. Too much power probably means unnecessary amplifier expense.

Category: POWER AMPLIFIER

Description
Reviews (0)

Features

High peak output power with up to 1600 watts from the GXD 4 and a whopping 4500 Watts from the GXD 8.
Power levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4Ω and 8Ω speaker systems.
Class D output stage with a universal power supply for high performance and efficiency.
Extensive and powerful loudspeaker processing built in. Includes high and low-pass filters, 4-band parameteric EQ, limiting, and delay.
E Series Entertainment System DSP Tunings are now available for GXD processing amplifiers:

– Visit the GXD Firmware Updater to download and update

Large LCD display simplifies amplifier setup and indicates amp status.
Inputs: Parallel XLR and 1/4-inch TRS connectors for compatibility with any source while providing convenient loop-thru capability.
Precision rotary encoders for gain and DSP parameter control.
Outputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections.
Digital limiting automatically protects the amplifier from damage due to temperature rise or overdrive.
Adjustable speaker protection to match your loudspeaker’s power and impedance.
Front panel LEDs indicate signal presence, input overload, and amplifier clipping.

SPECIFICATIONS	GXD 4	GXD 8
8Ω dynamic, both channels driven	600 watts per channel	1500 watts per channel
4Ω dynamic, both channels driven	800 watts per channel	2250 watts per channel
8Ω continuous, both channels driven	400 watts per channel	800 watts per channel
4Ω continuous, both channels driven	600 watts per channel	1200 watts per channel
Distortion (typical) 1 kHz at full rated power	< 1% THD
Signal to Noise (A weighted, 20 Hz–20 kHz)	100 dB
Input Sensitivity	1.2 Vrms, 3.9 Vrms
Maximum Voltage Gain	33.5 dB	36.5 dB
Output Circuitry	Class D
Power Requirements	1/8 power at 4Ω
– 100 V AC	3.4 A	6.2 A
– 120 V AC	2.9 A	5.6 A
– 230 V AC	1.6 A	3.2 A
Frequency Response (20 Hz–20 kHz)	+0.7 dB, -0.8 dB
Dynamic Headroom (4Ω)	1.25 dB	2.73 dB
Damping Factor (8Ω)	100
Input Impedance	20 kΩ (balanced), 10 kΩ (unbalanced)
Maximum Input Level	+23.5 dBu
Input Connectors (each channel)	3-pin XLR/F / 1/4-inch TRS, balanced
Output Connectors (each channel)	NL4, binding posts NL4 pinout: • Channel A on 1+, 1-; Channel B on 2+, 2- • Channel B on 1+, 1-
Amplifier and Load Protection	Short circuit, open circuit, thermal, RF protection Load protected against DC faults
Front Panel Controls and Indicators	2 × Rotary Encoders 3 × Operational buttons (HOME, ENTER, EXIT) 2 × Green Signal LEDs indicate signal presence 2 × Red A/D Clip LEDs indicate input over-drive and/or amplifier current clipping Blue Power LED ring indicates AC on 2.12-inch × 1.0-inch, 256 × 128 pixel LCD
DSP Functions	High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 20 Hz to 4 kHz Low-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 60 Hz to 4 kHz 4-band parametric EQ with variable frequency, gain, and bandwidth Peak limiter with power, agressiveness, and impedance selection Delay 50 msec max.
Dimensions (HWD)	3.5-inch (2 RU) × 19-inch × 10.2-inch (89 mm × 483 mm × 259 mm)
Weight (Net)	11.3 lb (5.1 kg)	13.2 lb (6.0 kg)

Reviews

There are no reviews yet.

Sign up for Newsletter

QSC GXD8 4500 WATT PROCESSING AMPLIFIER

Features

Reviews

Be the first to review “QSC GXD8 4500 WATT PROCESSING AMPLIFIER”

Sign up for Newsletter

QSC GXD8 4500 WATT PROCESSING AMPLIFIER

Features

Reviews

Be the first to review “QSC GXD8 4500 WATT PROCESSING AMPLIFIER”

Related Products

Login